STUDY OF THE PHYSICAL AND MECHANICAL PROPERTIES OF POLYMER COMPOSITES MODIFIED WITH BINARY FILLERS
Keywords:
polymer material, filler, physicochemical properties, extruder, as a polymer, modification, cleaningAbstract
This article examines the rheological properties of a polymer composite material
(PCM) depending on the inclusion of binary fillers in the polymer composition. The process of PCM
formation was carried out based on the introduction of binary fillers in an amount of 10-30% by
weight in the temperature range of 170-220 °C. The flowability, physical and mechanical properties
and oxygen index of PCM obtained on the basis of experiments were studied.
References
Trinath Biswal, Sushant Kumar BadJena, Debabrata Pradhan, Synthesis of polymer composite
materials and their biomedical applications, Materials Today: Proceedings, Volume 30, Part 2,
, Pages 305-315, https://doi.org/10.1016/j.matpr.2020.01.567
Рахманкулов А.А. Влияние дисперсных наполнителей на структуру и теплопроводнсть
немодифицированного и модифицированного поливинилиденфторида: Дис.канд.физ.-мат.наук.-
ОГУ, Одесса: 1987. —205 с.
G. Bhat, V. Kandagor, 1 - Synthetic polymer fibers and their processing requirements, Editor(s):
Dong Zhang, Advances in Filament Yarn Spinning of Textiles and Polymers, Woodhead
Publishing, 2014, Pages 3-30, https://doi.org/10.1533/9780857099174.1.3
Aleksandr E. Kolosov, Volodymyr I. Sivetskii, Elena P. Kolosova, Volodymyr V. Vanin,
Aleksandr V. Gondlyakh, Dmytro E. Sidorov, Igor I. Ivitskiy, Volodymyr P. Symoniuk, "Use of
Physicochemical Modification Methods for Producing Traditional and Nanomodified Polymeric
Composites with Improved Operational Properties", International Journal of Polymer Science,
vol. 2019, Article ID 1258727, 18 pages, 2019. https://doi.org/10.1155/2019/1258727
Joseph P. Greene, 12 - Polymer Composites, Editor(s): Joseph P. Greene, In Plastics Design
Library, Automotive Plastics and Composites, William Andrew Publishing, 2021, Pages 191-
, https://doi.org/10.1016/B978-0-12-818008-2.00007-6
Хайдаров Т.З., Рахманкулов А.А., Каримов М.У., Джалилов А.Т. Очистка и выделение
углеродных нанотрубок // Universum: технические науки: электрон. научн. журн. 2023.
(114). URL:https://7universum.com/ru/tech/archive/item/15968 (дата обращения:
10.2023).
Khaidarov T.Z., Rakhmankulov A.A., Karimov M.U., Jalilov A. Growth of carbon nanotubes
on catalyst // Universum: химия и биология: электрон. научн. журн. 2023. 6(108).
URL:https://7universum.com/ru/nature/archive/item/15619 (дата обращения: 10.10.2023).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Innovatsion texnologiyalar
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
